Creative Water Solutions

Natural Water Treatment for Pools, Spas, and more

  • Store
  • Cart
  • Moss Basics
  • Industrial
    • Cooling Towers
    • Boilers
    • Steam Generators
    • Waste Water Systems
    • Spray Injector Systems
    • Industrial Resources
  • Commercial
    • Pools
    • Spas
    • Waterparks
    • Fountains
    • Ponds
    • Commercial Resources
  • Residential
    • Residential Pools
    • Residential Spas
    • Residential Fountains
    • Residential Ponds
    • Buy Residential Products
    • Residential Resources
  • Contact
    • Customer Care
    • Frequently Asked Questions
  • News
Home / Residential / Residential Fountains

Residential Fountains

PoolMoss® for fountains brings the power of Sphagnum moss to the residential fountains. In addition to providing a new level of enjoyment for home users, it also reduces the time, cost, and effort associated with maintenance and service issues. Sized according to a fountain’s water volume, the amount of PoolMoss® is easily determined and applied. The system starts with the easily installed CC-F or CC-STxS contact chamber, and PoolMoss®, which is easily changed on a monthly basis.
Residential_Fountain(880x600)

Installation

  • Open black contact chamber.
  • Insert PoolMoss® for fountains Starter dose into contact chamber (Option – insert a few rocks into dispenser to weigh down to bottom)
  • Snap contact chamber closed
  • Insert contact chamber into fountain in an area with substantial water flow – ideally underneath a waterfall
Fountain CC
CC-F

 Maintenance

  • Change moss every 30 days.  After first month, use PoolMoss® for fountains Maintenance dose.
  • When changing PoolMoss® for fountains: remove old moss from contact chamber and replace with new moss. Insert contact chamber back into fountain.
  • If winterizing your fountain, simply remove the contact chamber, dispose or compost moss contents, and clean and store contact chamber.
  • If treating the fountain with algaecide or shock or chlorine levels above 5 ppm, remove contact chamber from water before treatment and re-install after algaecide dissipates or sanitizer levels return to below 5 ppm.
  • Do not change water in the fountain unless water quality requires. PoolMoss® conditions water over time, and if the water is changed, you are removing much of what has been put into the water.
  • When water is changed, change the PoolMoss® as well for best results.

Storage and Handling

  • Keep PoolMoss® dry until use
  • PoolMoss® for fountains Starter and Maintenance doses are good for fountains up to 10,000 gallons
  • To treat fountains 10,000 gallons +, see our Fountain Products

Getting Started

Get Started on your Fountain

Nature had the idea first.

The first all natural and sustainable plant-based water treatment solution for today's water issues. Our products harness the natural properties of Sphagnum moss to improve water quality and affect every surface touched by water.
Image Text

© Copyright 2003-2015 · Creative Water Solutions

13809 Industrial Park Blvd. Plymouth, MN 55441 USA

Office: 877-212-6493